In the next window click on the "Authentication" tab, Make sure "Enable IEEE 802.1x...." checkbox is UN-Checked, the rest of this window should be greyed out.
If your network is Encrypted go on to step 6 otherwise Click ok and try to connect to your network again.
If the box was checked, then that was why you were getting the “unable to find a certificate to log you on to the network” message because Windows is looking for one, but your wireless router is not setup for certificate security. Once I unchecked that box and tried to reconnect to the wireless network, everything worked fine!
I cannot get WPA2 enterprise to work on my network. Windows Domain, using IAS and its own CA Linksys WAP200 Access Point I setup the AP to use WPA2-Enterprise Mixed using RADIUS I setup and registered IAS on the domain controller.
The client settings on the laptop match the IAS settings and the certificate is definately installed.
WPA2 is supported as i can connect to WPA2 personal APs. During the connection it flashes that it "connected" for a second then goes to "Validating Identity" which it eventually timesout on.
Home Edition, etc.): You have now succesfully configured Windows XP to connect to eduroam network.
In order to connect to eduroam network in future, simply bring up Wireless Network Connection window by double-clicking its icon in the tray bar , select eduroam network and click on Connect.
The below guide has been tested on MS Windows XP Professional and is based on Windows' default wireless configuration tool (Wireless Zero Configuration).
Screenshots are taken from Professional version thus may slightly differ from other versions (e.g.
By default, XP will re-authenticate with the user credential after the user logs-on (there is no way to do computer-only with XP, I believe).
I'd start by reviewing the event logs on your IAS server for reasoning as to why it's not authenticating your client.
The Network Connections folder and the notification area icons provide information about the state of the authentication.